WCPM Calculator Logo
WCPMCalculator

Words Correct Per Minute

Running Record Calculator

Count the running words, errors and self-corrections on the record sheet, then enter them below. Accuracy is (running words − errors) ÷ running words × 100, the error ratio is running words ÷ errors, and the self-correction ratio is (errors + self-corrections) ÷ self-corrections. Add the reading time to get WCPM.

By Last updated

record_voice_over

Running record scoring

Enter the numbers from your running record sheet.

Add the reading time to see words correct per minute (WCPM) as well.

What is a running record?

A running record is a way of capturing what a child does while reading a text aloud. The teacher follows along on a record sheet, marking each word read correctly with a tick and noting every error, self-correction, and repetition. The method was developed by Marie Clay, who described it in her book An Observation Survey of Early Literacy Achievement (Heinemann, 4th edition, 2019), and it is widely used in early literacy to check how well a child can read a particular text and to choose the next level of book.

Once the reading is finished, the marks are turned into numbers. Accuracy tells you how much of the text was read correctly, the error ratio shows how often errors occur, and the self-correction ratio shows how often the child notices and fixes a mistake. This calculator does all three, and also gives words correct per minute if you add the reading time.

How to calculate a running record

Count the running words (every word printed in the text you scored, counting a word each time it appears in the text but not the words a child repeats while reading), the errors, and the self-corrections. Then use these formulas:

Accuracy % = (running words − errors) ÷ running words × 100

Error ratio = 1 : (running words ÷ errors)

Self-correction ratio = 1 : ((errors + self-corrections) ÷ self-corrections)

WCPM = (running words − errors) ÷ minutes

Round the two ratios to the nearest whole number.

Worked example

A student reads a 150-word passage aloud in 1 minute 30 seconds. You record 9 errors and 4 self-corrections.

Measure Working Result
Accuracy(150 − 9) ÷ 150 × 10094% (instructional)
Error ratio150 ÷ 9 = 16.71:17
Self-correction ratio(9 + 4) ÷ 4 = 3.251:3
WCPM(150 − 9) ÷ 1.5 minutes94

This reader is working at the instructional level on this text and fixes roughly one in every three or four of their own errors, which suggests they are monitoring what they read.

Scored running record example (marked sheet)

A first grader reads this 69-word story aloud in 58 seconds while the teacher marks a record sheet. The passage is original, written for this page.

Key: ✓ = read correctly. A word over a line is what the child said, placed over the text word (substitution). SC = self-correction. A dash (—) is an omission or an insertion. T = told. R = repetition. Only substitutions, omissions, insertions and told words count as errors (E). Self-corrections and repetitions do not.

Marked running record sheet with errors and self-corrections for each line
Line Text What the child said (marks) E SC
1Max the dog ran to the park.✓ ✓ ✓ ✓ ✓ ✓ ✓00
2He saw a big red ball by the tree.✓ ✓ ✓ bagbig (said "bag" for "big") ✓ ✓ ✓ ✓ ✓10
3Max ran fast and got the ball.✓ ✓ ✓ ✓ ✓ ✓ ✓ R (repeated “ran fast”)00
4A girl said, “Good dog, Max!”✓ giftgirl (said "gift" for "girl") SC ✓ ✓ ✓ ✓01
5Then Max sat down in the shade.✓ ✓ ✓ ✓ ✓ ✓ T (told “shade”)10
6He was tired but he was happy.✓ ✓ triedtired (said "tried" for "tired") SC —but (said "—" for "but") ✓ ✓ ✓11
7The girl gave him a long drink of water.✓ ✓ givegave (said "give" for "gave") SC ✓ ✓ big— (said "big" for "—") ✓ ✓ ✓ ✓11
8Max lay by her feet and went to sleep.✓ ✓ ✓ ✓ footfeet (said "foot" for "feet") ✓ ✓ ✓ ✓10
9It was a good day at the park.✓ ✓ ✓ ✓ ✓ ✓ ✓ ✓ R (repeated “at the park”)00
Totals69 running words53

The lines contain 7 + 9 + 7 + 6 + 7 + 7 + 9 + 9 + 8 = 69 running words. Errors: the line 2 substitution, the line 5 told word, the line 6 omission, the line 7 insertion and the line 8 substitution, so 5 in all. Self-corrections: lines 4, 6 and 7, so 3. The repetitions in lines 3 and 9 are recorded but not counted.

Measure Working Result
Accuracy(69 − 5) ÷ 69 × 100 = 92.7593% (instructional)
Error ratio69 ÷ 5 = 13.81:14
Self-correction ratio(5 + 3) ÷ 3 = 2.671:3
WCPM(69 − 5) ÷ (58 ÷ 60) = 64 ÷ 0.967 = 66.266

At 93% this text is at the instructional level. The child noticed and fixed three of the eight slips made on first attempt, a self-correction ratio of 1:3, and Reading A-Z says a self-correction ratio of 1:3 or lower indicates the reader is self-monitoring. The five errors left in the record are the ones to study for patterns.

What do the accuracy levels mean?

Accuracy Level What it usually means
95% to 100%IndependentThe text is comfortable; the child can read it without help.
90% to 94%InstructionalSuitable for guided reading with teacher support.
Below 90%FrustrationThe text is too hard; choose an easier level.

These are the cut points most often used with running records. The Reading Accuracy Calculator uses the same bands and compares them with other systems, so use whichever convention your school follows. The bands above match the ones published by Reading A-Z and the Clemson University Early Literacy Center (see Sources). Accuracy is only one signal: also look at the kinds of errors, whether meaning is kept, and how well the child understands the text.

Error ratio to accuracy conversion

Each error ratio converts to an accuracy percentage with accuracy = (1 − 1/n) × 100, where n is the second number in the ratio. Values are rounded to one decimal place.

Error ratio Accuracy Band
1:580.0%Frustration
1:887.5%Frustration
1:1090.0%Instructional
1:1291.7%Instructional
1:1593.3%Instructional
1:2095.0%Independent
1:2596.0%Independent
1:5098.0%Independent
1:10099.0%Independent

A ratio of 1:20 is the bottom of the independent band, and 1:10 is the bottom of the instructional band. Reading A-Z gives 120 words read with 6 errors as 1:20, which is 95%.

What counts as an error?

  • Substitution: the child says a different word from the one in the text.
  • Omission: the child skips a word.
  • Insertion: the child adds a word that is not in the text.
  • Told word: the child cannot continue and the teacher supplies the word.

Not counted as errors: self-corrections, repetitions, and pronunciation that reflects the child's accent or dialect. If the child makes the same mistake on a word again, scoring guides differ, so follow the rule your program uses and apply it consistently.

Running record accuracy vs. WCPM

A running record focuses on how a child reads a specific text: accuracy, error patterns, and self-monitoring. Words correct per minute focuses on how fast they read correct words, which is a measure of oral reading fluency. They answer different questions and work well together. For a timed one-minute fluency check, use the main WCPM Calculator; to look at accuracy alone, use the Reading Accuracy Calculator.

Running records are not usually timed, but if you note the reading time you can also work out words correct per minute: divide the words read correctly by the minutes. Our guide on how to calculate words per minute shows the arithmetic, including how to turn seconds into minutes.

Running record calculator FAQ

How do you calculate running record accuracy? expand_more
Subtract the number of errors from the number of running words, divide by the number of running words, and multiply by 100. For example, a 150-word text read with 9 errors gives (150 − 9) ÷ 150 × 100 = 94% accuracy.
What is a good running record accuracy percentage? expand_more
Many programs treat 95% to 100% as the independent level, 90% to 94% as the instructional level, and below 90% as the frustration (hard) level. Different assessments use different cut points, so follow the convention your school or district uses.
What is an error ratio on a running record? expand_more
The error ratio shows how many words the child reads for each error. Divide the running words by the number of errors and round to the nearest whole number: 150 running words with 9 errors is 150 ÷ 9 ≈ 17, written 1:17.
How do you calculate the self-correction ratio? expand_more
Add the errors and the self-corrections, then divide by the self-corrections and round to the nearest whole number. With 9 errors and 4 self-corrections the ratio is (9 + 4) ÷ 4 ≈ 3, written 1:3. A lower number means the reader notices and fixes more of their own mistakes.
Are self-corrections counted as errors? expand_more
No. A self-correction is recorded (usually marked SC) but is not counted as an error, so it does not lower the accuracy percentage. It is used in the self-correction ratio and as evidence that the reader is monitoring meaning.
How many words should a running record passage have? expand_more
Many teachers use a passage of roughly 100 to 200 words, or a whole short book for the earliest levels. Count the running words in the portion you scored, counting a word each time it appears in the text but not the words a child repeats, so that the accuracy and ratios are based on the same count.
How do you calculate words per minute on a running record? expand_more
Count the words the child read correctly (running words minus errors), then divide by the reading time in minutes. Convert seconds first: 58 seconds is 58 ÷ 60 = 0.97 minutes. A child who reads 69 running words with 5 errors in 58 seconds scores 64 ÷ 0.97 ≈ 66 words correct per minute. Dividing all the words read, errors included, gives plain WPM instead.
Does a running record give WPM or WCPM? expand_more
Not unless you time it. A standard running record captures accuracy, error types and self-corrections, and it is not usually timed. If you time the reading, you can get words correct per minute from the same record sheet, which is what the calculator above does with the reading time field. Plain WPM counts every word, errors included, so WCPM is the more useful number.

Sources

  • Clay, M. M. (2019). An Observation Survey of Early Literacy Achievement (4th ed.). Heinemann. Heinemann product page. Confirms the title, author, edition and year.
  • Literacy Council (Reading Recovery). The Observation Survey. Names Marie Clay as the author and running records as part of the Text Reading task.
  • Reading A-Z. Analyzing and Scoring a Running Record. Source for the formulas, the accuracy bands (95–100%, 90–94%, 89% and below), the 120-word, 6-error example giving 1:20, and the note that a self-correction ratio of 1:3 or lower indicates self-monitoring.
  • Clemson University Early Literacy Center. Calculating Running Record Scores (Word file). Source for the same accuracy bands and the self-correction rate formula.

The rows of the error ratio table are calculated from the accuracy formula; they are not copied from a published chart.